Treillis

Lattice 1 1/4 Square Heavy Duty

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/8″

Lattice thickness : 3/4″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Privacy Square) 1 1/4

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/16″

Lattice thickness : 3/8″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Privacy-Heavy Duty) 1 1/4

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/18″

Lattice thickness : 3/4″

Size of openings : 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Standard-Heavy Duty) 2 5/8

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/8″

Slat thickness : 3/4″

Size of openings : 2 5/8″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Super-Privacy) 11/16

Caracteristics

Panel size: 4′ x 8′

Slat thickness: 3/16″

Lattice thickness: 3/8″

Size of openings: 11/16″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Privacy) 1 1/4

Caracteristics

Panel size: 4′ x 8′

Slat thickness: 3/16″

Lattice thickness: 3/8″

Size of openings: 1 1/4″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Lattice (Semi-Privacy) 1 3/4

Caracteristics

Panel size: 4′ x 8′

Slat thickness : 3/16″

Lattice thickness: 3/8″

Size of openings  1 3/4″

Available in DesignWood cedar or in green ACQ treated wood

 

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Regular Lattice

Caracteristics

Panel size : 4′ x 8′

Slat thickness : 3/16″

Lattice thickness : 3/8″

Sive of openings : 2 5/8″

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product