logo

Moulding

Moulding (End Cap)

Caracteristics

Available in the following dimensions:

  • 1″ x 2″ x 8′
  • 2″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

Moulding (Nailing Strip)

Caracteristics

Dimensions:
1″ x 1″ x 4′
Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

2″ X 4″ Moulding (Large Top Rail)

Caracteristics

Dimensions : 2″ x 4″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

2″ X 3″ Moulding (Large Top Rail)

Caracteristics

Dimensions : 2″ x 3″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

2″ X 2″ Moulding (End cap)

Caracteristics

Dimensions : 2″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product

1″ X 2″ Moulding (End Cap)

Caracteristics

Dimensions : 1″ x 2″ x 8′

Available in DesignWood cedar or in green ACQ treated wood

Recommandations

DesignWood Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • If in contact or installed above other materials (Apparent siding, ramps, fascia…) a sealer should be applied before installation. Extra pigmentation could be left in the surface of lumber and stain permanently under components.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • Moisture could appear on lumber in high humidity conditions but can easily be removed with a water and soft soap mix.

P96 (post)

  • Use DW-10-15 matching color from Bois traite S.C. for end cuts to maintain warranty and assure longevity.
  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.

ACQ Treated wood

  • After installation and dry to the touch, a waterproof wood stain should be applied immediately to any treated wood to add protection from cracking and color changing.
  • Use recommended treated wood hardware.
  • Pre-drilling is recommended to avoid splitting.
  • Contact with aluminum is not recommended.
  • Treated Wood products found in Hardware stores are meant for above ground use only.
  • It is possible to obtain an ACQ treatment for fresh water and ground contact use upon request.

 

 

Where can you buy this product